DESCRIPTION
Essential Oil Diffuser
The diffusion of Essential Oils allows you to benefit from the finesse and variety of fragrances as well as the aromatic properties of Essential Oils. Whether it is to sanitize the atmosphere, remove bad odors, create an invigorating, relaxing or refreshing atmosphere, there is an Essential Oil or a Phytosun Arôms Diffusion Complex adapted to each situation.
Ultrasonic Diffusion
This technique allows for a very gentle diffusion. The water is loaded with aromatic molecules and disperses into fine droplets.
The Ultrasonic Diffusion
3 modes of diffusion
1st pressure: light diffusion (1 min of operation then 1 min of stop). Automatically turns off the diffuser after 1 hour.
Second press: light diffusion (1 min on then 1 min off).
2nd press: moderate diffusion (2 min on then 1 min off). Extinguishes the diffuser automatically after 4 hours.
Third press: moderate diffusion (2 min on then 1 min off).
3rd pressure: intense diffusion (3 min of operation then 1 min of stop). Extinguishes the diffuser automatically after 4 hours.
Second press: intense diffusion (3 min on then 1 min off).
4th press: stop.
Ambient light function
1st press: light activation.
2nd press: OFF
This allows the device to be used as a mood light without diffusion by only pressing the button.
Diffuser suitable for a room of about 30m². Diffuser rechargeable by USB cable. USB cable supplied.
The diffuser is suitable for a room of about 30m².
Vial of Essential Oils or Diffusion complexes sold separately.
This product contains a nickel metal hydride (NiMH) battery.
Tips for Use
Before the first use, please charge the diffuser for 4h.
1. Place the device on a flat, stable and unobstructed surface.
The device should be placed on the ground.
2. Unlock the diffuser cover by turning it until the mark (triangle) is above the open padlock symbol on the side of the device and remove the outer cover.
3.
3. Fill the reservoir with mineral water to the maximum level indicated in the reservoir (80ml).
4. Add a few drops of essential oil (1 to 5 drops) to this tank.
5. Replace the lid by placing the mark over the open lock symbol and lock it by turning it to the closed lock.
6. Insert the round plug of the charging cable into the socket on the back of the diffuser.
7.
7. Connect the USB connector to a computer or 100-240V AC adapter 5V DC output and plug the adapter into a 230V power outlet (adapter not included)
7.
OPERATION PRECAUTIONS
Read the instructions carefully before use.
Do not use in pregnant and nursing women, people with a history of epilepsy or seizures, people with asthma, and people hypersensitive to Essential Oils.
Keep out of reach of children.
Use only 1 to 5 drops maximum of essential oil per 80ml fill of water.
An excess could prevent diffusion and damage the device.
Do not use pure essential oils without water.
Only for diffusion of Essential Oils. Do not inhale.
Do not use Essential Oils that are not recommended for use in diffusion.
Do not use with synthetic perfumes or essences.
Keep away from moisture and away from water.
Do not touch the device with wet hands.